Asahimas Flat Glass AMFG









Asahimas Flat Glass (AMFG)

 Asahi Glass Co. Ltd. the world's foremost glass producer was founded by Mr. Toshiya Iwasaki and determine to take on the challenge of domestic flat glass production in the 1900s. The Search commenced for a new plant site could offer convenient water transportation and room to expand. In the end, Amagasaki, Hyogo, was selected as the location for the new plant. The land acquired in August 1907 become the site of Amagasaki Plant, where Asahi Glass Born.
 In 1970s Asahi Glass Co. Ltd. which was searching for a new overseas production base after Thailand, jointly established Asahimas Flat Glass a Foreign Investment Company (PMA) with PT Rodamas which was established by trade merchant Mr. Tang Siong Kie. PT Rodamas is a leading Indonesian private business group that has interest in industrial and consumer products. The idea to merge Asahi Glass' technical expertise along with the technology and Rodamas' strong grasp of the local market is a good strategic of partnership that makes Asahimas the glass pioneer in this country.
 Asahimas commenced its glass manufacturing in April 1973, from simple clear glass produced using the traditional Foucault Process. Therefore, its product line was quickly diversified to include new, innovative products such as Specialty Glass, Safety Glass, Reflective Glass and Mirror. In 1975 the Company first began construction of its Safety Glass factory and immediately began the commercial production using Tempering Process in 1976. In the same year, Asahimas also built the 2nd Furnace for Flat Glass in Jakarta and start on its commercial production in 1977. In 1981, Asahimas introduced the Float Glass technology in its new, 3rd Furnace in Jakarta, which was the Company's 1st Float Line. In the mean time, Asahimas closed its 2nd Furnace using the Foucault Process in the year 1983. In 1985 Asahimas also began construction of its 4th Furnace (2nd Float Line) in Surabaya factory, which would later begin commercial production in 1987. The Company then built its 5th Furnace (3rd Float Line) and 6th Furnace (4th Float Line) in 1990 and 1996, which started its commercial operation in 1993 and 1997 respectively. The former Furnaces are located in Jakarta, while the latter in Surabaya.
 1985 was also an essential year for the Safety Glass ensuing the introduction of the new Safety Glass laminating process. As a follow-up action to this new technology, Asahimas then began construction of new Laminated Glass production line in 1994, which is the same year with the closing of the 1st Furnace using the Foucault Process. And during 1997, Asahimas started the first phase in development of its Safety Glass factory in Bukit Indah Industrial Park, Cikampek, West Java, which later commence its commercial production in 1999.
 These days, Asahimas increases an aggregate installed production capacity of 630,000 tons for Flat Glass, 5,800,000 square meters for Safety Glass and 2,400,000 square meters for mirror. This large number of annual capacity ranks Asahimas not only as the largest glass manufacturer in Indonesia but also in Southeast Asia. Asahimas Flat Glass History

Vision
To Build The World A Better Place For Living

Mission
To Become A Respectable Manufacturer And Global Supplier Of Glass And It's Related Products Asahimas Flat Glass (AMFG)

Jakarta
Jl. Ancol IX / 5 Ancol Barat, Jakarta 14430, Indonesia
Phone : 021- 6904041 (8 lines)
Fax : 021-6918709, 6900470

Asahimas Flat Glass (AMFG) 















Asahimas Flat Glass (AMFG)


Asahimas Flat Glass (AMFG) 
















Alumindo Light Metal Industry ALMI


logo







Alumindo Light Metal Industry (ALMI)

 PT Alumindo Light Metal Industry Tbk. (ALMI) is the largest flat rolled aluminium manufacturer in Indonesia and South East Asia. Located in Sidoarjo, East Java, ALMI was established in 1978 and started commercial production in 1983, with initial production capacities of 12,000 tons and 4,800 tons p.a. of aluminium sheet and aluminium foil respectively.
 In the beginning, ALMI’s products were intended to meet the raw material needs of the Maspion Group to produce various metal kitchenware and of the packaging industry in Indonesian market. In line with the constantly increased demand, ALMI has gradually added its production capacity to the current level of 144,000 tons for aluminium sheet and 18,000 tons for aluminium foil.

 ALMI continues to upgrade its production facilities by adopting the latest technology to improve production processes and deliver high quality products to strengthen its position as the leading player in the flat rolled aluminium industries in South East Asia. Alumindo Light Metal Industry (ALMI)


Vision
To become a competitive renowned world-class aluminium sheet producer.

Mission
To produce high quality aluminium sheet and to improve customer satisfaction as well as maximizing shareholders and stackholders.
















Alumindo Light Metal Industry (ALMI)



 Metal Industry













Alakasa Industrindo ALKA









Alakasa Industrindo (ALKA)

 PT Alakasa Industrindo Tbk (the “Company”) was established within the framework of the Foreign Capital Investment Law No. 1 year 1967, as amended by Law No. 11 year 1970 and amended most recently by the Capital Investment Law No. 25 year 2007, based on notarial deed No. 31 dated February 21, 1972 of Soeleman Ardjasasmita, S.H., notary public in Jakarta. The deed of establishment was approved by the Minister of Justice of the Republic of Indonesia based on his Decision Letter No. Y.A.5/214/17 dated June 19, 1973, and was published in State Gazette No. 93, Supplement No. 836 dated November 20, 1973.
 The Company’s Articles of Association have been amended several times and most recently by notarial deed No. 7 dated June 3, 2008, of Fathiah Helmi, S.H., notary public in Jakarta, concerning the revisions of the Articles of Association in accordance with the Law of the Republic of Indonesia No. 40 Year 2007 on Limited Liability Company. The deed was approved by the Minister of Law and Human Rights of the Republic of Indonesia based on his Decision Letter No. AHU-70317.AH.01.02.Year 2008, and was published in State Gazette No. 13, Supplement No. 1600 dated February 14, 2011. Alakasa Industrindo (ALKA)

Vision
To be a company with competence in the aluminum business from upstream to downstream.

Mission
  1. To conduct research on business development from upstream to downstream in the aluminum businesses.
  2. To empower potential resources to support business development strategy.
  3. To attain professionalism through developing capabilities and upgrading the processes, operational and management system.
  4. To provide added value to shareholders, customers, employees and community. Alakasa Industrindo (ALKA)

Jl. Pulogadung no. 4, Kawasan Industri Pulogadung, Jakarta Timur
Telp : +62-21-4608855;+62-21-31997275;+62-21-31997276
Fax : +62-21-4608856;+62-21-31997278
Email : alakasa@indosat.net.id
Alakasa Industrindo (ALKA) 

ALKA ingin tambah pabrik aluminium di Kalimantan












Alakasa Industrindo (ALKA)



Almunium





Alkindo Naratama ALDO


Hasil gambar untuk Alkindo Naratama









Alkindo Naratama (ALDO)

 Starting from seeing an opportunity, Mr. Lili Mulyadi Sutanto started the business to produce gift wrapping paper. The paper was a recycled from used textile printing paper. He had such a great willingness and persevering work and at the end it created good results. After changing in technology of textile machinery that stopped using printing paper, Mr. Lili started a brand new chapter in his business. Mr. Lili still did the paper business; he opened a mimeographed paper cutter business in which the papers were distributed to schools, government institutions, and stationery shops. By using his knowledge about papers and his experience in the business along with his ability to find good chances to undergo business, Mr. Lili dared himself to start a converting paper business. He also acknowledged that Bandung, as a textile city, needed bobbin from paper to roll yarns. As a result, he decided to try a new business field.

 Mr. Lili together with Mr. Herwanto Sutanto and other business partners built PT Alkindo Naratama in 1989. The Company was built in order to produce bobbin to fulfil the needs from yarn companies. The requests of bobbins at that time were very high considering the textile and yarn entrepreneurs lived in Bandung in which the Company was built. The produced bobbin was a papertube to roll yarn in Draw Textured Yarn (DTY) and Partially Oriented Yarn (POY) types. The bobbin was made from a core board paper which was a recycled paper. Along with the textile and yarn machines technology's development, the requests of papertubes for various specifications were also developed such as the thickness, colours, even the tenacity of turning acceleration.

 In addition, based on the experiences and the abilities of finding the chances for business as well as the synergy of Mr. Herwanto expertise in marketing and Mr. Lili expertise in operational and production, Alkindo decided to add new product lines in the business. In 2007, the Company started to produce honeycomb, papercore, and edge protector. Alkindo also produced variant products made from combining honeycomb and edge protector.

 In the beginning, the Company only had one factory in Cimareme with the 1, 96 ha width of land and 1, 67 ha width of the building. The factory was used to produce papertube. Then, because the Company did not have enough land to undergo the business especially for developing the honeycomb, papercore and edge protector, in 2010 the Company built another factory near the first factory. The new factory has 4, 31 ha width of land and 1, 63 ha width of the building. The factory was built especially to produce honeycomb, papercore, and edge protector along with all the other variants.

 On July 12, 2011, the Company started a new beginning in its history. On that day, the Company officially traded its stocks in the Indonesia Stock Exchange. As a result, now the Company is a public company whose part of the stocks belongs to the public.
  It's been more than 20 years since the Company was built and enlivenes both the local business and export, the Company has given work opportunities to hundreds of employees. The Company also has given income for the country. Alkindo Naratama History

Vision
Becoming the best in giving the quality and service in the related industry. 

Mission
To create partnerships by providing the best quality to the customers in order to create a sustainable partnership.  

Head Office
Jl. Terusan Pasir Koja 273C
Bandung 40221 - Indonesia
Tel. +62-22-6011220 / 6028277
Fax. +62-22-6036489 / 6004508
email. alkindo@alkindo.co.id

 







Argha Karya Prima Industry AKPI


Argha Karya Prima Industry


 This New Corporate Identity will enliven the company's presence and personality, as it continues to progress in facing global challenges and providing sophisticated solutions for the packaging industry.
 After 3 decades since its establishment in 1980, PT Argha Karya Prima Industry Tbk has reflected its vision and mission through the new corporate identity system which will put PT Argha Karya Prima Industry Tbk as one of the most important global player in the flexible packaging industry.
 PT Argha Karya Prima Industry Tbk is one of the leading flexible packaging film manufacturers in Southeast Asia.The company's production facilities have a total installed capacity of almost 100.000 Ton per annum, producing a variety of packaging film product for industrial uses and consumer goods items, such as cigarettes, food products, paper lamination, adhesive tapes and others.In addition to production facilities in Indonesia, the company also has the production base in Malaysia under Stenta Films (M) Sdn. Bhd. Argha Karya Prima Industry (AKPI)



ARLENE

Arlene is Biaxially Oriented Polypropylene (BOPP) film which has been used by flexible packaging manufacturers world wide over decades for various applications.


ARETA

Areta is Biaxially Oriented Polyethylene Terephthalate (BOPET) film has been well known by reputable flexible packaging manufacturers world wide for various applications in flexible packaging applications.



Argha Karya Prima Industry (AKPI)


Argha Video Profile






Aneka Gas Industri AGII










Aneka Gas Industri (AGII)

 Established in 1916, AGI’s main businesses supply industrial gases, namely air gases (oxygen, nitrgoen, and argon), synthetic gases, fuel gases, rare gases, sterilization gases, refrigerant gases and electronic gases. AGI also supplies mixed, specialty and medical gases along with complimentary equipment and installation offerings. AGI products have a myriad of applications and serve multiple industries including medical, mettalurgy, energy, infrastructure and others. Aneka Gas Industri (AGII) History


Vision
Our vision is to be the most desirable company that continuously grows

Mission
  • Give The Best for The Stakeholder
  •  Integrity and committed to quality, Health & Safety Environment, and Good Corporate Governance
  • Enhance TCS (Total Customer Solution)
  • Expand the business area coverage and development of product, service and technology 
 Aneka Gas Industri (AGII)

UGM Samator Pendidikan Building A,
5th and 6th Floor
Jl. Dr. Sahardjo No.83, Manggarai - Tebet.
Jakarta Selatan 12850 - Indonesia 


Phone  + 62 21 8370 9111    
Faximili + 62 21 8370 9911
 Aneka Gas Industri (AGII)


http://www.anekagas.com/images/uploads/about_us/2.jpg















Gas Industri (AGII) History


Aneka Gas Industri Official Corporate Movie