Lionmesh Prima (LMSH)
Originally named PT Lion Weldmesh Prima, it was established on December 14, 1982 in Jakarta which is engaged in the welding steel wire mesh industry. The Company began producing welding steel wire nets since the middle of 1984 under the brand name LIONMESH which is produced in various sizes with plain and threaded wire surfaces which are packaged in sheets or rolls.
The raw material we use is quality steel wire produced by PT. Krakatau Steel which then goes through the process of withdrawing into steel wire with U-50 quality with a characteristic melting voltage of 5000 kg / cm2 which is very advantageous when compared to ordinary reinforcing steel which has a characteristic melting stress of 2400 kg / cm2. The manufacturing process is done using the latest Swiss-made machines.
We were the first company to produce and market welding steel wire nets whose steel wire surfaces were formed "KARI" aimed at increasing bond strength with concrete.
Our products have been recognized by the Indonesian Industrial Standard (SII), which was later changed to the Indonesian National Standard (SNI) with SNI Certificate No. 0593 / Bd / SNI-AS / IV / 1995 dated 12 April 1995.
Along with the development of the increasingly advanced construction industry, we also produce wiremesh, mesh fences, mesh doors, and practical columns of unquestionable quality.
We have a factory in Jakarta covering an area of ± 5,700 m2 over an area of 9,500 m2 and a factory in Porong, Sidoarjo covering an area of ± 5,200 m2 over an area of 19,799 m2. And we proudly present to you our high quality products. Lionmesh Prima History
The raw material we use is quality steel wire produced by PT. Krakatau Steel which then goes through the process of withdrawing into steel wire with U-50 quality with a characteristic melting voltage of 5000 kg / cm2 which is very advantageous when compared to ordinary reinforcing steel which has a characteristic melting stress of 2400 kg / cm2. The manufacturing process is done using the latest Swiss-made machines.
We were the first company to produce and market welding steel wire nets whose steel wire surfaces were formed "KARI" aimed at increasing bond strength with concrete.
Our products have been recognized by the Indonesian Industrial Standard (SII), which was later changed to the Indonesian National Standard (SNI) with SNI Certificate No. 0593 / Bd / SNI-AS / IV / 1995 dated 12 April 1995.
Along with the development of the increasingly advanced construction industry, we also produce wiremesh, mesh fences, mesh doors, and practical columns of unquestionable quality.
We have a factory in Jakarta covering an area of ± 5,700 m2 over an area of 9,500 m2 and a factory in Porong, Sidoarjo covering an area of ± 5,200 m2 over an area of 19,799 m2. And we proudly present to you our high quality products. Lionmesh Prima History
Lionmesh Prima (LMSH)